Products
soft starter for asynchronous motor - ATS01 - 25 A - 110..480V - 2.2..11 KW
soft starter for asynchronous motor - ATS01 - 25 A - 110..480V - 2.2..11 KW
This Altistart 01 soft starter is DIN rail mounted and can feed single or 3-phase asynchronous motors with a rating up to 25A. This Altistart 01 can be used for a motor rated power up to 11kW or 15hp for 3-phase (110V to 480V AC) and up to 2.2kW for single phase (110V to 230V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
- Range of product: Altistart 01
- Product or component type: Soft starter
- Product destination: Asynchronous motors
- Product specific application: Simple machine
- Device short name: ATS01
- Network number of phases: 1 phase
- [Us] rated supply voltage: 110...480 V - 10...10 %
- motor power kW: 11 kW, 3 phases at 400 V, 3 kW, 3 phases at 230 V, 4 kW, 3 phases at 230 V, 9 kW, 3 phases at 400 V, 7.5 kW, 3 phases at 400 V, 5.5 kW, 3 phases at 230 V. 2.2 kW, 1 phase at 230 V
- motor power hp: 11 hp, 3 phases at 460 V, 2 hp, 3 phases at 210 V, 3 hp, 3 phases at 210 V, 5 hp, 3 phases at 230 V, 9 hp, 3 phases at 460 V, 7.5 hp, 3 phases at 230 V
- IcL starter rating: 25 A
- utilisation category: AC-53B conforming to EN/IEC 60947-4-2
- current consumption: 125 A at nominal load
- Type of start: Start with voltage ramp
- power dissipation in W: 1 W at full load and at end of starting 126 W in transient state