Products
motion servo drive, Lexium 28, single and three phase 200...230 V, 750 W
Schneider Electric LXM28AU07M3X, motion servo drive, Lexium 28, single and three phases 200...230 V, 750 W
This product is part of the Lexium 28 range, an offer of motion servo drives for machines from 0.05 to 4.5kW. The motion servo drive without EMC filter, features a HMI interface 7-segment display with 5 buttons. Thanks to its open communication concept, Lexium 28 servo drive can be easily integrated into numerous different control system architectures. It is a motion servo drive with a rated supply voltage of 220V (single and three phase), an output current of 13.5A at 220V, a power of 750W/1HP and a continuous power of 750W at 220V. It is furnished with spring terminal for electrical connection and RJ45 connectors for CANopen, CANmotion integrated communication interfaces. Physical interface is RS485 for Modbus Serial line slave. It is an IP20 rated product. Its dimensions are 55mm (Width) x 146mm (Depth) x 150mm (Height). It weighs 1kg. This product is certified by CE, CSA, and CULus. It meets EN/IEC 61800-5-1 standards. This product is compatible with servo motor BCH2 (130mm, 1 motor stack) at 500W, servo motor BCH2 (80mm, 2 motor stacks) at 750W, and servo motor BCH2 (130mm, 1 motor stack) at 600W. Lexium 28 and Lexium BCH2, the optimized servo bundle for all motion control solutions are cost-effective, energy efficient, and embedded safety. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.
- Range of product: Lexium 28
- Product or component type: Motion servo drive
- Device short name: LXM28A
- Format of the drive: Compact housing
- Line current: 6 A 181.8 % at 220 V, single phase 6 A 160.6 % at 220 V, three phase
- Network number of phases: Single phase Three phase
- [Us] rated supply voltage: 220 V (- 10...15 %) for three phase 220 V (- 20...15 %) for single phase
- Supply voltage limits: 200…255 V three phase 170…255 V single phase
- Supply frequency: 50/60 Hz - 5...5 %
- Network frequency: 47.5...63 Hz
- EMC filter: Without EMC filter
- Continuous output current: 4.5 A at 16 kHz
- Output current 3s peak: 13.5 A at 220 V
- Continuous power: 750 W at 220 V
- Nominal power: 0.75 kW at 220 V 16 kHz
- Switching frequency: 16 kHz
- Overvoltage category: III
- maximum leakage current: 1.3 mA
- Output voltage: <= power supply voltage
- Electrical isolation: Between power and control
- Type of cable: Shielded motor cable (temperature