Products
Altistart 22
soft starter-ATS22-control 220V-power 230V(55kW)/400...440V(110kW)
Range of product | Altistart 22 |
---|---|
Product or component type | Soft starter |
Product destination | Asynchronous motors |
Product specific application | Pumps and fans |
Component name | ATS22 |
Network number of phases | 3 phases |
[Us] rated supply voltage | 230...440 V - 15...10 % |
Motor power kW | 110 kW 400 V 110 kW 440 V 55 kW 230 V |
Factory setting current | 195 A |
Power dissipation in W | 117 W for standard applications |
Utilisation category | AC-53A |
type of start | Start with torque control (current limited to 3.5 In) |
IcL starter rating | 210 A for connection in the motor supply line for standard applications |
IP degree of protection | IP00 |
Assembly style | With heat sink |
---|---|
function available | Internal bypass |
Supply voltage limits | 195…484 V |
Supply frequency | 50...60 Hz - 10...10 % |
Network frequency | 45...66 Hz |
Device connection | To the motor delta terminals In the motor supply line |
[Uc] control circuit voltage | 230 V - 15...10 % 50/60 Hz |
Control circuit consumption | 20 W |
Discrete output number | 2 |
Discrete output type | Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O |
Minimum switching current | 100 mA at 12 V DC (relay outputs) |
Maximum switching current | 5 A 250 V AC resistive 1 relay outputs 5 A 30 V DC resistive 1 relay outputs 2 A 250 V AC inductive 0.4 20 ms relay outputs 2 A 30 V DC inductive 7 ms relay outputs |
Discrete input number | 3 |
Discrete input type | (LI1, LI2, LI3) logic, 5 mA 4.3 kOhm |
Discrete input voltage | 24 V <= 30 V |
Discrete input logic | Positive logic LI1, LI2, LI3 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA |
Output current | 0.4...1 Icl adjustable |
PTC probe input | 750 Ohm |
Communication port protocol | Modbus |
Connector type | 1 RJ45 |
Communication data link | Serial |
Physical interface | RS485 multidrop |
Transmission rate | 4800, 9600 or 19200 bps |
Installed device | 31 |
Protection type | Phase failure: line Thermal protection: motor Thermal protection: starter |
Marking | CE |
Type of cooling | Forced convection |
Operating position | Vertical +/- 10 degree |
Height | 425 mm |
Width | 206 mm |
Depth | 299 mm |
Net weight | 33 kg |
Motor power range AC-3 | 55…100 kW at 200…240 V 3 phases 110…220 kW at 380…440 V 3 phases |
Motor starter type | Soft starter |